Skip to product information
1 of 5

Residential Irrigation Wire Multiplier System - Run Multiple Sprinkler Zones Using only 2 Wires - Simple Solution for Adding Zones or Repairing Common Wiring Problems. (4 Zone Set)

Residential Irrigation Wire Multiplier System - Run Multiple Sprinkler Zones Using only 2 Wires - Simple Solution for Adding Zones or Repairing Common Wiring Problems. (4 Zone Set)

Regular price $180.94 USD
Regular price Sale price $180.94 USD
Sale Sold out
Taxes included. Shipping calculated at checkout.

About this item

  • Need to add more zones to your valve box, but don't have the spare wires to control them? Has some of your wiring gone bad between your controller and your valve box? Don't waste your time trenching in new wire. As long as you have 2 good wires, MuxPuck allows you to run up to 8 zones over those 2 wires. Do you have a long run of multi-core wire to install? Consider that pairing the MuxPuck system with a 2 conductor landscaping wire might be the more cost effective solution.
  • Other solutions only support 2 zones, cut power delivery to the solenoid in half, require batteries, require you to forfeit zones from your controller, or force you to give up the smart functionality built into your controller. MuxPuck overcomes all of these limitations.
  • An intuitive LED indicator lets you know exactly what's going on in the MuxPuck system by telling you which zone is currently active and can even help with troubleshooting.
  • MuxPuck is waterproof and has no problem living in a wet valve box.
  • Mux Pucks can be used in many different configurations, ranging from a simple 2 puck configuration with the controller and one valve box, to a more complex configuration with the controller and multiple valve boxes. Intuitive wiring diagrams at muxpuck.com show the different possible configurations. If you need an additional tail puck to support a more complex configuration, reach out to us via the contact form on the MuxPuck website.
  • The MuxPuck system is designed for 24VAC controllers/solenoids and has been succesfully tested over wire distances of over 700 feet on many of the most popular sprinkler controllers.
  • No programming or additional configuration required. Just wire it up like the wiring diagrams show and you're ready to go!
  • Mounting holes make it convenient to mount to a wall or zip tie into place in a valve box.
  • Technical Note: Some brands of sprinkler controllers have a feature that allows two channels to be on simultaneously for a few seconds when transitioning between zones. This feature can interfere with MuxPuck operation (and will be indicated by a red blinking LED) on certain controllers due to the way the output electronics on the controller are designed and should be turned off. On some controllers it is as easy as turning off the 'water hammer' feature and on others it is called the 'delay between valves' feature and you'll simply need to add 2-3 seconds between valves. If you need assistance please visit the MuxPuck website and use the contact form and we'll get back with you ASAP.

Overview

  • Color: Black
  • Brand: MuxPuck
  • Voltage: 24 volts_of_alternating_current
  • Product Dimensions: 3.5"L x 3.5"W x 0.75"H
  • Item Weight: 10 ounces
Quantity

Low stock: 10 left

View full details
  • ⭐⭐⭐⭐⭐

    Jordan Blake — Cedar Falls, Iowa
    The product information was organized clearly, which made it easier to compare the available options. My order matched the description, and the overall shopping process was straightforward.

  • ⭐⭐⭐⭐⭐

    Casey Morgan — Waco, Texas

    I appreciated the practical selection and the detailed specifications provided on the product page. Everything arrived securely packaged, and communication about the order was easy to follow.

  • ⭐⭐⭐⭐⭐

    Taylor Reed — Springfield, Missouri

    CropForge made it convenient to browse equipment and replacement parts in one place. The item was as described, and I would consider shopping here again for future farm projects.

  • ⭐⭐⭐⭐⭐

    Avery Collins — Lexington, Kentucky

    The website was easy to navigate, and I found the product details helpful before ordering. The purchasing experience felt organized and straightforward from checkout through delivery.

Frequently Asked Questions

How do I know whether a product will fit my tractor or equipment?

Review the product description, dimensions, hitch category, PTO requirements, shaft size, hydraulic specifications, mounting points, and compatible models before ordering. If you are unsure, contact us with your equipment’s make, model, year, and relevant measurements. Compatibility remains the customer’s responsibility unless expressly confirmed in writing by CropForge.

Does CropForge sell complete tractors or only equipment and parts?

CropForge focuses on farm machinery, tractor attachments, agricultural tools, livestock equipment, and replacement components. Please check each product listing carefully to confirm exactly what is included, as tractors, vehicles, batteries, hoses, mounting hardware, or accessories shown in photographs may be sold separately.

Are assembly and installation required?

Some products may arrive fully assembled, while others may require partial assembly, professional installation, adjustment, lubrication, or additional hardware. Assembly requirements vary by product. Always follow the manufacturer’s instructions and use a qualified technician when installation involves hydraulic, electrical, PTO, structural, or safety-critical components.

How can I check the status of my order?

When tracking information becomes available, it will be sent to the email address used at checkout. Tracking may take some time to update after the shipping carrier receives the package. If you have not received an update, contact us with your order number at fawoldwariop@gmail.com.

Can I change or cancel my order after placing it?

Contact us as soon as possible if you need to change or cancel an order. We will try to assist, but changes and cancellations are not guaranteed once processing or shipment has begun. Orders that have already shipped may need to follow the applicable return process.

Will every item in my order arrive together?

Products may be stored or shipped from different locations, so an order containing multiple items may arrive in separate packages and on different dates. Each available shipment may receive its own tracking information. Separate delivery does not necessarily mean that an item is missing.

What should I do if my item arrives damaged, defective, or incorrect?

Contact us promptly and provide your order number, a description of the issue, photographs of the item, packaging, shipping label, and any visible damage. Keep all original packaging until the matter is resolved. Do not install, operate, modify, or discard a damaged or incorrect product before receiving instructions from us.

Can I return a product if it does not fit my equipment?

Return eligibility depends on the condition of the product and the requirements stated in our Return & Refund Policy. Products that have been installed, used, fueled, altered, damaged, or assembled may not qualify for return. Customers should verify compatibility and specifications before purchasing.

Are warranties included with CropForge products?

Warranty coverage, when available, varies by product and manufacturer. Any applicable warranty terms will be stated in the product listing, packaging, or manufacturer documentation. CropForge does not provide additional warranties unless expressly stated in writing. Normal wear, misuse, improper installation, unauthorized modification, and incompatible use may not be covered.

What safety precautions should I follow when using farm equipment?

Read and follow all product manuals, warning labels, and manufacturer instructions before assembly or operation. Wear appropriate protective equipment, keep guards and shields installed, and never service machinery while it is powered or moving. Agricultural equipment should only be operated by trained individuals and within the product’s stated limits.